Axle carrier bracket for 2GR-FE with E153 transmission
This bracket is designed to hold the right side axle stub when the E153 is mated to the 2gr-fe motor. This bracket positions the axle centered with the transmission output unlike the U151 bracket which actually positions the bearing slightly down and out which causes accelerated wear to the right side output seal.
Using this bracket means there is no need to machine your axle stub.
The bracket weighs 1.1lbs which is approximately a 2lbs savings over the steel bracket.
This bracket is designed to hold the right side axle stub when the E153 is mated to the 2gr-fe motor. This bracket positions the axle centered with the transmission output unlike the U151 bracket which actually positions the bearing slightly down and out which causes accelerated wear to the right side output seal.
Using this bracket means there is no need to machine your axle stub.
The bracket weighs 1.1lbs which is approximately a 2lbs savings over the steel bracket.
This bracket is designed to hold the right side axle stub when the E153 is mated to the 2gr-fe motor. This bracket positions the axle centered with the transmission output unlike the U151 bracket which actually positions the bearing slightly down and out which causes accelerated wear to the right side output seal.
Using this bracket means there is no need to machine your axle stub.
The bracket weighs 1.1lbs which is approximately a 2lbs savings over the steel bracket.