2AR-FE/1AR-FE conversion thermostat housing

$210.00

This is a custom thermostat housing that aligns the outlet with the MR2 spyder chassis. Also includes the center coolant hose and clamps.

Note that the hose that goes on the thermostat is silicone due to the higher temperature in that area. this is a generic 45 degree hose that needs a few inches cut off the end. the center coolant hose is a custom molded rubber hose just for this application.

This is a custom thermostat housing that aligns the outlet with the MR2 spyder chassis. Also includes the center coolant hose and clamps.

Note that the hose that goes on the thermostat is silicone due to the higher temperature in that area. this is a generic 45 degree hose that needs a few inches cut off the end. the center coolant hose is a custom molded rubber hose just for this application.

The kit includes

  • Custom machined thermostat housing
  • Thermostat gasket
  • Two OEM style hose spring clamps
  • Silicone hose
  • Heat sleeving rated to 2000F to reduce radiant heating of coolant hose by 90%.

Please note that the hose and the heat sleeving will both need to be cut down to length.